NEW

340 Odyssey

Conquer any waters with the Weldcraft 340 Odyssey, the ultimate vessel for performance, versatility, and comfort.

Introducing the pinnacle of the Weldcraft fleet: the Weldcraft 340 Odyssey. Measuring 37 feet and 1 inch in length, with an 11-foot beam and a 10-foot 6-inch bottom width, the Odyssey comfortably accommodates up to 12 people and boasts a total capacity of 19,000 lbs. The main cabin’s innovative walk-around style configuration allows easy access to the boat’s perimeter, significantly enhancing the fishable area.

Powered by a Yamaha twin-engine setup delivering up to 900 horsepower, the Weldcraft 340 Odyssey is built to conquer any waters, whether for cruising or fishing. The forward-leaning windows not only add to the vessel’s sleek, modern look but also provide superior visibility for better navigation. Equipped with state-of-the-art Garmin electronics and a digital switching backbone, managing the boat’s features is seamless, ensuring a smooth and enjoyable experience. Handcrafted and customizable, Weldcraft boats surpass angler expectations in performance and versatility, offering the comforts that elevate fishing from a pastime to a lifestyle. Experience the stability and reliability of the Weldcraft 340 Odyssey, designed with angler functionality in mind.

SPECIFICATIONS

Length (including bracket)	37′ 1″ / 11.3m
Beam	132″ / 3.35 m
Bottom	125″ / 3.17 m
Sides	48” / 121.9cm
Approx. Dry Weight	11.800lbs / 5,352kg
Fuel	300 USG diurnal fuel system / 1135.6 L
Max HP Rating	900 HP / 671kw
Maximum Displacement	19,000lbs / 8,618kg
Maximum Capacities	12 person or 1,980lbs / 8,618kg 5,200lb, (2,359kg) motor, persons, gear

BUILD YOUR OWN WELDCRAFT

Customize your boat how you want it.

Start Building Free Dealer Quote

DEADRISE

STANDARD FEATURES

Hull Features

30″ twin engine offshore bracket with integral bottom sheet
Full reverse chine bottom design
Full-width tread plate swim platform
Extruded chine, formed toe rail and keel strip
Dual side rub rail w/ lower one extended to keel
Walk-around cabin w/ forward leaning windows, Alaskan bulkhead, tread plate roof, and 3″ full length top grab rails
Cuddy cabin with electronics cabinet
Swept bow w/ mounting tub for anchor winch, and anchor pulpit
Transom w/ insulated 37-gallon Livewell, cutting board lid & locking rigging compartment doors
4 Side storage trays
Dual 73-gallon insulated aft sub-floor fish boxes with self draining lids and individual diaphragm pumps
Self-draining cockpit w/ composite UV resistant flooring
Transom walk-thru doors on port and starboard side
Pressure tested sub floor fuel cell
Billet aluminum welded bow eye & stern eyes
7x – 11″ billet aluminum welded cleats mounted under gunwale with hawse rings

Exterior Features

Choice of white or grey HD marine coating on boat interior and cabin from the gunwales up
Reel Tread Decking on gunwales
Side graphics
Offshore zinc anodes – 2x
Stainless steel thru-hull fittings below waterline w/ seacock valves
Roof rod rack holding 37 rods
Radar arch
Crab davit sleeve and base welded into starboard gunwale

Interior Features

Frame-less bonded window package including 2 piece fixed front windshield, slider side windows, and rear bulkhead windows
Port and Stbd front helm seats w/flip-up bolsters and suspension seat base on aluminum riser
4 – 33″ bench seats with storage and foot rests
Cuddy Cabin head w/ electric toilet & 6 gal. holding tank, sink with 20 gal. of fresh water, sleeping berth, and sliding V-berth door
Cabin sub-floor storage including rod storage
Forward overhead storage cabinet
Port console with storage and locking door
Carpeted cabin sidewalls
Composite flooring inside cabin
Overhead and floor courtesy lighting in main cabin
Aft deck and forward-facing LED work lights

Rigging Features

HelmMaster electronic steering w/ Tilt helm, Yamaha twin engine DEC control, pre-rig, and Electronic Key Switch
Driver dash w/auxilary buttons and USB charging ports
Garmin GPS map 8616xsv 16″ Multi-Function Display with 3D transducer, 1kW wide beam transducer, engine monitoring, and digital switching to all connected electronics
ZipWake Trim Control system w/controls at main helm
Rear helm cabinet with HelmMaster steering w/ tilt, Yamaha twin engine DEC control and pre-rig, dual USB ports, and cup holder
2x – Pantograph windshield wipers w/ passenger wiper switch
LED navigation lights, anchor lights, and marine horn
3x – 2000 GPH Auto bilge pumps, 1x – 4000 GPH Auxillary Pump, & 1x – high water bilge alarm
Carbon monoxide detector in V-berth and main cabin
3x – washdowns, 1x – raw water in the bow, 1x – raw water in the cockpit, and 1x – freshwater in the cockpit
2x – group 27 AGM motor batteries and 2x – group 31 AGM house batteries
Shore power (Includes ELCI, isolation transformer, 3x GFCI outlets, 1 breaker panel, 2x 3-bank battery chargers, battery charger displays at main helm, and dock cord)
Remote battery switches for each battery bank w/emergency start crossover at main helm