Revolution

210 Revolution

Rule the Water in a Revolution

The Weldcraft 210 Revolution builds upon the acclaimed design of its predecessors by extending its length, providing even more interior space that enhances safety and stability for families and serious anglers. This additional space houses an extended bottom paired with our offshore bracket and an expansive fishing cockpit—the largest in its category—affording ample space for navigation and comfort.

But the Weldcraft 210 Revolution is more than just a vessel capable of sailing various waterways; it’s a bastion of safety and multifunctionality on the water. Encircled by a wide gunwale and equipped with a true-reverse chine for superior wave handling, this boat is not merely a means to travel—it’s a robust platform designed for anglers who seek extra space and superior performance during their aquatic exploits.

SPECIFICATIONS

Length
(including bracket)
23′ 8″ / 7.21m
Beam 8′ 2″ / 2.49m
Side 0.125″ / 3.175mm (5052-H32)
Height of Sides 38″ / 96.52cm
Bottom 0.190″ / 4.83mm (5086-H116)
Bottom Width 6′ 6″ / 1.98m
Approx. Dry Weight 2288lbs. / 1038kg
Fuel 65 USG diurnal fuel system / 246.1L
Transom 0.190″ / 4.83 mm
Max HP Rating 250HP / 187kw
Maximum Capacities 7 persons or 1155lb, (525kg)
2450lb, (1111kg) with motor, persons, gear

BUILD YOUR OWN WELDCRAFT

Customize your boat how you want it.

Start Building Free Dealer Quote

DEADRISE

STANDARD FEATURES

  • 25″ Single engine offshore bracket with integral bottom sheet
  • Full width swim platform w/ Reel-Tread Decking
  • Extruded chine, toe rail, & keel strip
  • Full reverse chine bottom design
  • 5 piece welded, walkthrough windshield with grab handles
  • Recessed self-bailing bow w/ Reel-Tread Decking
  • Bow storage box with anchor rope cutout
  • 3″ satin-finished bow and stern rails
  • Bow storage (Room for 2nd battery)
  • Port console w/ storage and grab handle
  • Transom fish box w/ 2-piece cutting board lid and framed rigging access panels
  • 4 Side storage trays with gunwale rod racks – 2 per side
  • Welded double bow eye
  • 2 – welded stern eyes
  • 5 – 8″ welded cleats
  • Pressure tested subfloor fuel cell – diurnal system compliant
  • Transducer brackets
  • Trim tab brackets
  • Choice of standard paint colors
  • Top, 1/2 side and deck paint
  • Side stripes & vinyl graphics
  • Offshore zinc anodes – 2x
  • Stainless steel thru-hull fittings below waterline w/ seacock valves
  • Deluxe captain seats on adjustable pedestal bases
  • 37″ Rear bench seats w/back rest
  • Heavy duty convertible top with side curtains, backdrop
  • Vinyl covered marine grade plywood floors and kick panels
  • Easy access bow storage w/ snap on net containment covers
  • Carpeted bow storage
  • Stainless steel cup holders
  • Half fisherman’s interior
  • Rear transom storage
  • Forward and aft floor storage compartments
  • Easy access bow storage w/ snap on net containment covers
  • Locking glove box
  • Driver side pantograph wiper
  • Hydraulic steering system
  • Switch panel w/ fuel gauge and USB port
  • LED Navigation lights and anchor lights
  • Stainless steel marine horn
  • Auto bilge pump
  • Fuel water separator
  • Single battery switch only (no battery)
  • EZ Loader – TOEM102 21-24 5200
  • Gateway – ETT35/23-24
  • Full Hard Top
  • Bottom upgrade
  • Outboard pre-rig
  • Hang, rig & run
  • Zinc anodes
  • Bow seat
  • Wiper options
  • Paint upgrades
  • Convertible top boot
  • Stern cover
  • Front seat upgrade
  • Auxiliary fuel line w/quick-connect
  • Swim step with 2 step folding ladder & grab handle
  • Transom livewell
  • Bow electric plug-in
  • AM/FM stereo w/Bluetooth
  • Wash-down system
  • Aft livewell
  • Courtesy lights
  • Auto bilge
  • Locking glove box door
  • Dual battery system
  • Transom Knife & Tackle Tray
  • Painted diamond deck bow
  • Livewell Tackle Fence

Revolution Gallery

BUILD YOUR OWN WELDCRAFT

Customize your boat how you want it.

Start Building Free Dealer Quote

Our Complete Lineup

CUDDY KING

OCEAN KING

MAVERICK

REVOLUTION

REBEL